Filter
Top Products
TSXPCX3030
154
Configuration screens for drivers using the TSX PCX 3030 cable.
At a Glance Once the drivers of the TSX PCX 3030 cable are installed, you must select the cable
with the drivers that can use it. The compatible drivers are:
Uni-Telway driver, version ≥ V1.5,
Modbus driver, version ≥ V1.1.
Uni-Telway
driver
The following table describes the procedure for declaring the cable with a
Uni-Telway driver.
Step Action
1 From the Drivers Manager, select the Uni-Telway Driver tab.
2 Click on the Configuration button.
3 Click on the Edit button.
Result: the Station parameters window appears
4 Select from the Com Port zone, the communication port associated with the
cable. For example COM3 (TSXPCX3030 Cable).
Link Parameters
Station ID
COM Port
Uni-telway Slave address
Communication Modem
NumberBase
Hayes
Tel No.
Password
Advanced
Uni-Telway
OK
Modem Used
Cancel
Parameters of the Station
[Default]
COM 3 (TSXPCX3030 Cable)
13