Filter
Top Products
TSX FPC 10 ISA card
59
4 Click on Change settings.
Result
The following window appears:
5 From the Value list, select the non-conflicting address range.
Note: note the values because they must be coded onto the ISA card.
6 Confirm with OK.
7 Carry out steps 5 to 8 selecting Interrupt Request from the list.
8 Confirm with Ok then restart the station with the card connected.
Step Action
Modify input/output range
Enter the input/output range you wish to define for this
peripheral.
You can either enter a specific range and the closest valid
range will be automatically selected, or select a range using
the indicator arrows.
?
No peripherals in conflict.
V
alue:
The parameter you have chosen is not in conflict with
other peripherals.
01A0-01AF
OK Cancel
Information concerning conflicts