Filter
Top Products
TSX FPC 10 ISA card
63
How to adjust the ISA TSX FPC 10 card parameters
At a Glance Before installing the TSX FPC 10 card, you must adjust the following parameters:
the standard I/O address,
the IRQ interrupt address.
Illustration This card comprises the following elements:
Numbers and
elements
The following table describes the different parameters to be adjusted:
12 3
Number Element
1 Jumpers (SW1) are used to select the DMA channel (Direct Access Memory)
(no object).
2 A jumper (SW2) is used to select the IRQ (Interrupt Request) level.
3 The micro-switches (SW3) are used to select the standard address of the card
in the I/O space.