Filter
Top Products
Installation
70
6 In the Select Network Component Type window, select the type Protocol
then click on Add.
Result
The following window appears:
7 Click on Have Disk.
8 Select the access path of the files to be installed from the CD-ROM or the disk
using the Browse button.
9 Click on Ok.
10 In this window select the ETHWAY Protocol then click on OK.
11 Select the ETHWAY protocol then click on Properties.
12 In the configuration screen (See Driver configuration tool, p. 73), configure the
protocol then click on OK.
13 Complete the installation by clicking on OK.
Step Action
Selection of network protocol
Manufacturers:
Disk supplied...
Click on the network protocol you wish to install and then click on OK.
If you have an installation disk for this component, click on the Disk
supplied.
OK Cancel
Network protocol:
Network supervisor pilot
DLC Protocol
NetBEUI Protocol
Transport Protocol compatible with NWLink
IPX/OSI-LAN Protocol
Microsoft
Schneider Corporation