Filter
Top Products
Installation
74
Description This table describes the different areas which make up the configuration screen:
Number Element
1 This field is used to select the Ethernet card (useful if there are several Ethernet
cards). This field cannot be modified under Windows 2000\XP.
2 This field is used to select the ETHWAY driver instance. This field cannot be
modified under Windows 2000\XP.
3 These windows are used to define the address {Network.Station} of the Ethernet
card used.
4 This box is used to replace the Ethernet card’s MAC address with the
SCHNEIDER MAC address (00 80 F4 Network Station).
5 This window is used to configure the reception acknowledgment by defining:
the retransmission period between two frames if the remote device is not
responding,
the storage time of a frame originating from the remote device (useful for
loaded networks).
Note: in general, storage time is three times the retransmission period.
6 This window is used to configure the transmission and reception buffer size in
bytes.