Filter
Top Products
Installation
81
Description This table describes the different areas which make up the configuration screen:
Number Element
1 All software functions can be accessed using this menu bar:
Configuration : creation or deletion of a profile
Xip : start, stop or reinitialize the driver
Test : test request transmissions with options
Aide : information on the software
2 The profile used by the driver is selected from this list.
3 The X-Way address of the station is configured from this window.
4 The new connections with remote devices associated with the driver are set from
this window.
5 Existing connections with remote devices can be viewed via this list.
6 Connections can be added, removed or redefined with these buttons.
7 This status bar is an operating indicator (driver stopped or started) with a
comment zone.