Filter
Top Products
14
SCSI
Device
0
SCSI
Device
1
SCSI
Device
2
SCSI
Device
3
Term
SCSI
Device
7
SCSI
Device
6
SCSI
Device
5
SCSI
Device
4
Term
Figure 6. SCSI bus configuration
A connector (J06) at the back of the drive accepts the I/O cable that connects
it to the system. The daisychain cable is a continuous unshielded cable having
one connector for each drive it connects to.
Refer to the reference manual (publication 83327640) for guidelines on I/O
cabling. These guidelines discuss the use of unshielded cabling inside cabinets
and shielded cabling running between cabinets. They also contain information
about constructing continuous daisychain cabling (including part numbers for
the required cabling components).
Table 5 on the following page shows the pin assignments and signal names for
the unshielded single-ended I/O cable. Table 6 shows the pin assignments and
signal names for the unshielded differential I/O cable. Detailed information about
interface lines is provided in the reference manual.