Filter
Top Products
18
Installation procedures
With the site requirements completed, the enclosure designed, and the drive
unpacked, you are ready to begin the installation. The following procedures are
included in drive installation:
• Setting the control board jumpers
• Installing the power supply
• Attaching an optional bezel
• Mounting the drive
• Connecting the system I/O cabling
• Grounding the system
• Synchronizing the spindle
Setting the control board jumpers
Caution. Do not remove the control board to set jumpers.
The control board on the drive contains a number of jumpers that must be set
correctly for normal operation of the drive. Figure 7 identifies jumpers, gives their
locations on the control board, and lists the possible settings for normal drive
operation.