When moving the machine, be sure to unplug the power plug.
Moving the machine with the plug as is inserted can damage
the power cord and cause fire and electric shock hazards.
When moving the machine on the floor, retract the Adjusters
and ensure that Casters make contact with the floor. During
transportation, pay careful attention so that Casters do not
tread power cords. Damaging the power cords can cause an
electric shock and/or short circuit.
When lifting the cabinet, be sure to hold the catch portions or
bottom part. Lifting the cabinet by holding other portions can
damage parts and installation portions, due to the empty
weight of the cabinet, and cause personal injury.
Do not insert the fork to places other than designated when
using a Forklift to transport the machine.
Failure to observe this could cause falling down and injury
resulting from falling down.
5 . PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE
Do not push the plastic made parts. Failure to observe this may
damage parts and cause injury due to fragments resulting from
damage.
When transporting the product in places with steps,
disassemble into each unit before transporting. Inclining the
product in an as is assembled condition or placing the
cabinet in places with steps can damage the unit’s joining
portions.
To protect surface, do not directly apply a rope to the
surfaces of product. Use protective materials to the places
the rope is applied to.
17