Sega Star Wars Racer Arcade Barcode Reader User Manual


 
8 .
SYSTEM TEST MODE
• The contents of settings changed in the TEST mode are stored when the TEST
mode is finished from EXIT in the MENU mode. If the power is turned off before
the TEST mode is finished, the contents of the setting changes do not take effect.
• Executing “BACKUP DATA CLEAR” in the SYSTEM TEST MODE does not clear the
BOOKKEEPING data in the GAME TEST MODE.
• Entering the TEST mode clears fractional numbers of coins less than one credit
and BONUS ADDER data.
The SYSTEM TEST mode mainly allows checks of the IC Board for accurate functioning , monitor adjustment, as well
as CRT TEST and COIN ASSIGNMENTS, etc. The following assignments, however, should be designated for this
product.
CABINET TYPE : 1 PLAYER (S)
MONITOR TYPE : HORIZONTAL
SERVICE TYPE : COMMON
COIN CHUTE TYPE : COMMON
SYSTEM MENU
RAM TEST
JVS TEST
SOUND TEST
C.R.T. TEST
SYSTEM ASSIGNMENTS
COIN ASSIGNMENTS
BOOKKEEPING
BACKUP DATA CLEAR
ROMBD TEST
CLOCK SETTING
ROM BOARD TEST
GAME TEST MODE
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
TEST ITEM SELECT
1
2
3
After turning the power on, press the TEST button to display the test item menu shown above.
Press the SERVICE button to move the arrow to the desired item and press the TEST button.
When finished, bring the arrow to EXIT and press the TEST button to return to the Game mode.
26