Sega Star Wars Racer Arcade Barcode Reader User Manual


 
13. REPLACING THE FLUORESCENT LAMP AND BUTTONS
When performing the work, be sure to turn power off. Working
with power on can cause an electric shock or short circuit accident.
The fluorescent lamp, when it gets hot can cause burns. Be very
careful when replacing the Fluorescent Lamp.
To perform work safely and securely, be sure to use a step which is in a
secure and stable condition. Not using a step or using an unstable step can
cause violent falling accidents.
THE FLUORESCENT LAMP
Take out the 2 Truss Screws and remove the Plate Holder.
Lower the Billboard Plate and replace the Fluorescent Lamp.
1
2
3
1
2
START BUTTON AND VIEW CHANGE BUTTON
Be careful not to damage the wiring connection inside the start button and view change
button.
Turn power off.
Take out the 4 Truss Screws.
Disconnect the connector attached to the start button, and the VR
BUTTON START REVIEW 1can be removed.
LAMP COVER A
FLATHEAD SCREW (2)
M4 X 8 black
FLUORESCENT LAMP 20 W : LOCAL PURCHASE
62