Filter
Top Products
10 - 3 GREASING
Do not touch solenoid. The solenoid can be very hot.
Be sure to use the designated grease. Using undesignated grease can
cause parts damage.
Do not apply greasing to undesignated places. Failure to observe this
can cause malfunctioning or quality deterioration of parts.
The period for greasing specified herein is standard. Apply greasing
to specified portions as occasion arises.
Once every 3 months apply greasing to the volume mesh portion in the ASSY MECHA LEVER
and the ASSY BRAKE spring. For spray greasing, use GREASE MATE (PART NO.090-0066).
Apply greasing to the BOOST button MECHA portion semiannually. Use GREASE 248 (PART
NO.090-0070) for the portion. If the specified greasing is not obtainable, use greasing for the
cold-proof, heat resisting plastic instead.
APPLY GREASING TO THE ASSY MECHA LEVER
APPLY GREASING TO THE ASSY BRAKE
Insert the spray-greasing nozzle into the
square hole of the ASSY BRAKE
LEVER to apply greasing to the spring
portion.
PHOTO 10.3 a VOLUME GEAR MESH PORTION
54