Sega Star Wars Racer Arcade Barcode Reader User Manual


 
In this case the cabinet is set to NO LINK.
GAME ASSIGNMENTS
DEFAULT VIEW POD
DIFFICULTY NORMAL
URL ON
CONTROL PANEL STANDARD
> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
The in -game default view can be set in DEFAULT VIEW . Select either POD (Subjective view) or
REAR (Objective view from the rear).
The game difficulty can be set in DIFFICULTY. Select from among VERY EASY/EASY/NOR-
MAL/ HARD/ VERY HARD. The higher the difficulty, the lesser the points you can get when
passing through the checkpoints.
When the URL is set to ON, the official Home page address for the game is displayed during the
ADVERTISE mode.
The ID number for each machine for the communication play can be set in the SEAT NUMBER.
Select the ID. number from 1 to 4 and apply to each machine linked for communication play. If the
same numbers are applied to 2 or more machines , the monitor displays “ CONFLICTING SEAT
NUMBER” and the game cannot start.
In CONTROL PANEL, settings for the solenoid control for the lock mechanism inside the control
panel and the error display can be performed. Select the either DELUXE or STANDARD. when
selecting DELUXE as the BOOST button is pressed, the button is locked and is passed down due to
activation of the solenoid. An error is displayed on the screen if the BOOST button or the lock
mechanism malfunctions. (Sec.15).
When selecting STANDARD, the solenoid control and an error display are not performed.
46