Open as PDF
To close the bypass tray, perform
step1 and then step 2 in the
illustration and push the round
projections at the right of the tray
until they click.
Set the paper guides to the copy paper width. Insert the copy paper (print face down)
all the way into the bypass tray.
Paper must be fed narrow side into the feed slot.
Transparency film, labels, and other special purpose papers must be fed
When copying onto transparency film, remove each copy promptly. Do not let
copies stack up.
When loading an envelopes, make sure that it is straight and flat.
Press the tray select ( ) key to select the bypass tray. Set the number of copies if
using standard copy paper. Press the print ( ) key.