Sharp AL-1551 All in One Printer User Manual


 
28
4
Special functions
USER PROGRAMS
3
Press the print ( ) key. The entered program number will be steadily lit and the
currently selected parameter number for the program will blink on the right side of the
display.
4
Select the desired parameter using the right copy quantity ( ) key. The entered
parameter number will blink on the right of the display.
Program
Mode Parameters
No.
1 Auto clear time 0 OFF 1 30 sec. * 2 60 sec.
3 90 sec. 4 120 sec. 5 10 sec.
2 Preheat mode 0 30 sec. 1 60 sec. * 2 90 sec.
3 Auto power shut- 0 2 min. * 1 5 min. 2 15 min.
off timer 3 30 min. 4 60 min. 5 120 min.
4 Stream feeding 0 OFF * 1 ON
mode
5 Auto power shut- 0 OFF * 1 ON
off mode
Factory default settings are indicated with an asterisk (*).
5
Press the print ( ) key. The right-hand number in the display will be steadily lit and
the entered value will be stored.
To change the setting or to set another mode, press the clear ( ) key. The
copier will return to step 2.
6
Press the light ( ) or dark ( ) key to return to the normal copy mode.
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
1
Press the clear ( ) key to reset the display to zero.
2
Press and hold down the clear ( ) key for approximately 5 seconds. The total number
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.