Sharp AR-287 All in One Printer User Manual


 
7-6
CHAPTER7
Staple sort
The STAPLE SORT mode staples 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", and 11"
x 17" size copies. Stapled sets cannot be delivered to the top tray.
NOTE:
Different size originals cannot be copied onto copy paper of their respective sizes
in the STAPLE SORT mode. The paper size selected for the first scanned original
will be used for all originals. To copy different size originals in the STAPLE SORT
mode, select the paper size for the largest original.
Using the RADF
1
Set the originals in the document feeder tray.
If the number of copies in one set is more than 50 for
8-1/2" x 11" or 8-1/2" x 11"R paper or 25 for 8-1/2" x 14" or
11" x 17" paper, the copies will not be stapled.
The stapling position shown in the left figure is the factory de-
fault position.
2
Press the OUTPUT key.
3
Press the “STAPLE SORT” key on the touch panel.
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
AUTO
EXPOSURE
Stapling position
READY TO COPY.(DOCUMENT FEEDER MODE)
OUTPUT
TOP TRAY
OFFSET
SORT
OFFSET
TRAY
STAPLE
SORT GROUP
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO 8/ 11
1
2