Filter
Top Products
3-37
CHAPTER3
10
Press the lower “OK” key.
●
The TEXT STAMP menu will appear again.
11
Select the print direction.
●
If the PAMPHLET COPY function is used with this function, the
portrait orientation ( ) must be selected.
12
Press the upper “OK” key.
13
Make all other desired copier selections and enter the
desired number of copies.
14
Press the START key.
●
If the document feeder is used, scanning of originals and copying
will start.
●
If the document glass is used, proceed to the next step.
15
Replace the finished original with the next original after
the START key indicator lights up, and then press the
START key. Repeat this step until all originals have been
scanned. Then, press the “READ-END” key on the touch
panel.
●
Copying will start at this time.
●
Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of
originals larger than 8-1/2" x 11" can be scanned.
●
To cancel the SELECT STAMP function, select the SELECT
STAMP function again and press the “CANCEL” key.
POSITION
CANCEL
OK
OK
DATE
SELECT
STAMP
PRINT
DIRECTION
PAGE
NUMBER
WATERMARK
DATE
SELECT
STAMP
TION
PAGE
NUMBER
WATERMARK
OK
OK
1
2 3
4 5
6
7
8
9
0
P
PROGRAM
AUDIT CLEAR
INT
CA
CLEAR ALL
START
SPECIAL FUNCTIONS Text stamp
TEXT STAMP
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO 8/ 11
1
2