7-19
CHAPTER7
FINISHER (AR-FN2)
Top cover
Top tray
Offset tray
Stapler cover
Staple cartridge
Paper feed area cover
PART NAMES
The copier has two different finisher modes: one sorts copies into
sets matching the sequence of the originals and the second groups
copies by original. When an optional finisher (AR-FN2) is installed,
the copier can automatically staple the sorted copies. Each collated
set of copies or group of copies can be stacked offset from the
previous set.
CAUTION
Do not put pressure on the finisher or subject it to undue force.
Specifications
Tray capacity Top tray: 250 sheets
Offset tray: 750 sheets
Paper size Top tray: 5-1/2" x 8-1/2" to 11" x 17", 12" x 18"
Offset tray: 8-1/2" x 11"
Paper weight Top tray: 14 lbs. to 34 lbs.
Offset tray: 15 lbs. to 34 lbs.
For paper weighing more than 28 lbs., 8-1/2" x 11" is
the maximum size.
Offset Min. 61/64 inch
Paper size 8-1/2" x 11"
for stapling
Stapling capacity 30 sheets (20 lbs.)
Power supply Drawn from the copier
Weight Approx. 49 lbs. (22 kg)
Dimensions 18"(W) x 20-13/32"(D) x 32-19/64"(H)
(457 mm (W) x 518 mm (D) x 820 mm (H))
Specifications are subject to change for improvement without notice.
OPTIONAL EQUIPMENT
Finisher (AR-FN2)