Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
5-13
5. WEEKLY TIMER
Using the built-in weekly timer, you can have the copier automatically turned ON and OFF at specified
times. For instance, you can set the timer for the starting time and closing time of your office so that the
copier will automatically turn itself ON and OFF at those specified times.
- The ON/OFF times of the weekly timer are retained until they are changed. When the weekly timer is
resumed, the previous settings will again become effective.
- When the weekly timer is in use, the timer lamp on the control panel lights.
* When the power switch is turned off, the weekly timer does not work.
1
Press the PROGRAM key to enter the program
menu, and press the WEEKLY TIMER key.
- The WEEKLY TIMER key is half-tone shaded when the
weekly timer has already been set.
2
Check the settings on the display, and if corrections
are necessary, press the CHANGE key.
- If no correction is needed, press the SET key.
3
Set the ON/OFF times for each day of the week.
- Use the SUN and SAT keys to switch the days of
the week.
- Key in numbers using the digital keys. After entering each
number, press the upper SET key.
- After setting the times for all the days of week, press the lower
SET key. The WEEKLY TIMER key becomes half-tone
shaded.
Copying when the power is off
The copier can be used if you press START key.
- If you leave the copier for a while after the copy is finished, it will
automatically return to OFF-mode by the weekly timer.
For holidays when the copier is not turned on, key in the same
times for both ON and OFF, eg. ON:00:00 and OFF:00:00.