Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
1-8
BEFORE MAKING COPIES
2. TURNING ON THE POWER SWITCH
Turning ON the Power Switch/Auto Job Start
2
When “READY” appears, the copier is ready for
copying.
1
Turn ON the power switch.
- This message appears on the message panel of the Basic
Screen:
Wait Warming Up
Up to 5 jobs can be stored in the memory. Place the originals
for the 6th job on the original glass or the reversing automatic
document feeder and press the START key. The following
message will appear:
Turning ON the Power Switch
Auto Job Start
While the copier is warming up, place the original on the glass,
select the desired copy modes and press the
START key. The
copier starts scanning the originals.
When this message appears, copying will automatically start.
In this status, pressing the INTERRUPT key cancels the 6th
preset job.
To clear this status, press the CLEAR ALL or the STOP key.
- Time of warming up
AR-651/810: Approx. 160seconds
READY
Auto Start