Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
2-13
4. AUTO JOB START (JOB PRESET)
While multi-copying is in process, you can reserve the next copy.
1
Place the original(s). Page 2-9
2
Press the START key.
- Up to 5 jobs including the current printing job can be stored in
the memory. Place the originals of the 6th job on the original
glass or the reversing automatic document feeder and press
the
START key. The following message will appear:
Select copy modes as required.
Auto Start
Confirming and Cancelling Auto Job Start
Cancelling the job while waiting for the original to be stored
in the memory.
If you want to cancel copying the original when it has already
been set on the glass or the reversing automatic document feeder
and the following message is displayed:
Auto Start
press the
CLEAR ALL or the STOP key.
Cancelling the job while waiting for the original to be copied.
Deleting the data waiting to be printed (except for the case above)
Page 2-15
Confirming auto job start
Press the JOB STATUS key on the control panel, then the
JOB LIST key on the touch panel.