Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
7-22
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
5. ADDING STAPLES (OPTIONAL) (Cont.)
6
Return the staple cartridge to its original position.
- Insert the cartridge until it is caught by the claw and fixed
with a click sound.
2
Slide out the saddle stitch unit carefully toward the
front.
7
Close the front cover of the finisher.
5
Pull out the seal holding the staples straight upward.
Saddle Stitch Unit
* Only when the saddle stitch finisher (AR-F12) is installed.
1
Open the lower cover of the saddle stitch finisher.
If the following message remains displayed, repeat the above
procedure from
to .
Set staple cartridge