Filter
Top Products
2
EPA ENERGY STAR ® (MFD)
The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the ENERGY
STAR Program, to encourage the widespread and voluntary use of energy-efficient technologies that
enhance the workplace, improve product performance and prevent pollution. As an
ENERGY STAR Partner,
the SHARP Corp. has determined that this copier model meets the
ENERGY STAR guidelines for energy
efficiency.
ENERGY STAR guidelines for this class of copier require ENERGY STAR copiers to have an 'Off Mode'
feature that automatically turns the copier off after a period of inactivity, ensuring night and weekend shut-off.
The copier must also automatically change to a 'Low Power Mode' (Automatic Energy Save) after a period of
time since the last usage.
For Copier+Printer models,
ENERGY STAR guidelines require ENERGY STAR Multifunction copiers to have
a 'Sleep Mode' feature that automatically makes the copier enter the sleep mode after a period of inactivity.
The copier must also automatically change to a 'Low Power Mode' (Automatic Energy Save) after a period of
time since the last usage.
Specifically, this copier complies with the following requirements ––––
The AR-651/810 Copier model (Base model)
'Off Mode'-
The copier consumes less than 20 watts in the 'Off Mode'.
'Off Mode' Default Time-
The default time for the 'Off Mode' is 90 minutes.
'Automatic Energy Save'-
The copier consumes less than 255 watts (AR-651)/ 316 watts (AR-810) while in Energy Save Mode.
'Automatic Energy Save' Default Time-
The default time before switching to 'Automatic Energy Save Mode' is 15 minutes.
The AR-651/810 Copier + Printer model (Multifunction model)
'Sleep Mode'-
The copier consumes less than 95 watts in the 'Sleep Mode'.
'Sleep Mode' Default Time-
The default time while in 'Sleep Mode Mode' is 90 minutes.
'Automatic Energy Save'-
The copier consumes less than 300 watts (AR-651)/ 361 watts (AR-810) while in Energy Save Mode.
'Automatic Energy Save' Default Time-
The default time before swtching to 'Automatic Energy Save Mode' is 15 minutes.
Note1- The default setting for the 'Off Mode' or 'Sleep Mode' and 'Automatic Energy save' can be changed.
Note2- To restart the copier after auto shutoff, turn on the power switch. To restart the copier after sleep mode,
press the start key.
Note3- In the sleep mode, if printer data is received, or the start key on the control panel is pressed, the copier
starts warming itself up and prints out the data when it becomes ready.
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper,
please contact your authorized Sharp dealer.
ENERGY STAR is a U. S. registered mark.