Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
3-8
SETTING OF BASIC COPY MODES
3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE) (Cont.)
3
Press the key (shaded) on the right basic screen.
- The default setting is 1-Sided Originals to 1-Sided Copies.
Book-Type Originals 2-Sided Copies
1
Follow the same procedure 1 to 3 as shown above.
1
Place paper in the drawer(s). Page 2-4
- When using the mode of 1-Sided Originals to 2-Sided Copies
and 2-Sided Originals to 2-Sided Copies in bypass copying,
be sure to specify the paper size. Page 5-10,5-11
Select other copy modes as required.
5
Press the START key.
- When placing originals on the glass, perform from steps 5
on page 2-2 to step 6 on page 2-3 continuously.
4
Press the key as required.
- When using the mode of Book-Type Originals to 2-Sided
Copies, follow the procedure below.
2
Place the original(s). Page 2-9
*The acceptable paper sizes for this function are LT only.