Filter
Top Products
79
Programming Commands
In this section, all commands that are available in the PROG mode are
described, excluding keyboard commands and I menu commands.
Input and display commands
1. While creating a NEW or EDIT program,
press i to access the COMMAND
menu.
• The first page of the COMMAND menu is
displayed.
• Press d or u to scroll page by page.
•You may directly enter a command by pressing the corresponding
alphanumeric key without first having to display the relevant COMMAND
menu page.
Command Description
Key
operations
Examples
i 0
i 1
i 2
i 3
Print A
Input A
Input B≥
Wait 5
(hexadecimal
mode)
(binary mode)
Print B≥
Print” SHARP
Print
<variable>
Displays the value of the
specified variable. The display
format is determined by the
SET UP menu.
Displays the text entered after
the quotation mark. If the text
exceeds three lines, only the
last three lines will be displayed.
Temporarily stops the program
and prompts you to enter a
value for the variable with the
display ‘<variable>=?’.
Pauses the program for the
specified number of seconds.
The maximum wait time is 255
seconds. If no wait time is
specified, the program pauses
until you press any of the keys.
The BUSY indicator stays on
while the program is waiting.
Print”
<text>
Input
<variable>
Wait
<number>
Wait FF
Wait 1010
Chapter 7: Programming
<COMMAND-1>
ƒPrint ⁄Print"
¤Input ‹Wait