Filter
Top Products
E-23
Adjusting the Picture
• This projector’s picture is factory preset to standard settings. However, you can adjust it to suit your own prefer-
ences with the ADJUSTMENT buttons on the projector and the remote control.
• The adjustments can be memorized in RGB or VIDEO separately.
• Four picture modes can be adjusted: “PICTURE,” “BRIGHT,” “RED,” and “BLUE.”
Adjusting the Picture
1. Use the MENU button to select the mode
to be adjusted.
• When the MENU button is pressed, the MENU mode is
indicated for about 30 seconds. Press the ADJUST-
MENT / buttons to select “RGB ADJ.,” then press the
ENTER button.
2. Adjust the Picture
• Press the ADJUSTMENT / buttons to highlight the
picture adjustment item you want to adjust yellow.
• Press the ADJUSTMENT / buttons to move the “ ”
mark of the selected adjustment item to the desired
setting.
• The adjustment mode is displayed for about 30
seconds.
Description of Adjustment Items
RGB ADJ.
RGB INPUT ADJ.
IMAGE ADJ.
AUDIO
SYSTEM SETUP
LANGUAGE
:SEL. :NEXT
ENTER
:END
MENU
1
On-Screen Display
2
ADJUSTMENT button
For less contrast
For less brightness
For weaker red
For weaker blue
For less color intensity
Skin tones become purplish
For less sharpness
Selected item
PICTURE
BRIGHT
RED
BLUE
COLOR
TINT
SHARPNESS
RESET All RGB Video Adjustment items are returned to the
factory preset settings.
Note: To reset all adjustment items, select RESET in
“RGB ADJ. ” mode and press ENTER button.
ADJUSTMENT button
For more contrast
For more brightness
For stronger red
For stronger blue
For more color intensity
Skin tones become greenish
For more sharpness
3. Display Only the Item to Adjust
• Press the ADJUSTMENT / buttons to highlight the
picture adjustment item you want to adjust yellow. If you
press ENTER at this time, only the selected item will be
displayed.
• Press the ADJUSTMENT / buttons to move the “ ”
mark of the selected adjustment item to the desired
setting.
• The adjustment mode is displayed for about 30
seconds.
Notes:
• When a VIDEO signal input has been selected, only
“PICTURE,” “BRIGHT,” “COLOR,” “TINT” and “SHARPNESS”
can be adjusted.
• TINT only appears in NTSC mode.
4. Press the MENU button anytime to exit
RGB ADJ.
3
+
:SEL.
:ADJ.
:ENTER
ENTER
:END
MENU
-
PICTURE 0
RGB ADJ.
BRIGHT
RED
BLUE
RESET
MEMORY SELECT
+
0
0
0
0
:SEL.
:ADJ.
:NEXT
ENTER
:END
MENU
-
+
-
+
-
+
-
PICTURE