Filter
Top Products
E-37
Our projector uses LCD (Liquid Crystal Display) panels.
These very sophisticated panels contain 519,168 pixels
( × RGB) TFTs (Thin Film Transistors).
As with any high technology electronic equipment such as
large screen TVs, video systems and/or video cameras,
there are certain acceptable tolerances that the equip-
ment must conform to. Sharp’s acceptable tolerances
permit a total of 6 inactive TFTs, which may result in
illuminated or inactive dots on the picture screen.
This will not affect the picture quality or the life
expectancy of the unit.
If you have any questions about this matter, please
call toll free 1-800-BE-SHARP (1-800-237-4277).
U.S.A. ONLY
Specifications are subject to change without notice.
Specifications
Product Type LCD Projector
Model PG-D100U
Video system PAL/SECAM/NTSC 3.58
Display method LCD panel × 3, RGB optical shutter method
LCD panel Panel size: 1.3" (19.8 [H] × 26.4 [W] mm)
Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 519,168 dots (832 [H] × 624 [V])
Lens F2.8 to 3.3, f = 53 to74 mm
Projection lamp 265 W Metal halide
Contrast ratio 100:1
Video input signal RCA Connector: VIDEO, composite video, 1 Vp-p, sync negative, 75 Ω
terminal
RCA Connector: AUDIO, 0.5 Vrms less than 22 kΩ
S-video input signal 4-pin mini DIN connector
Y (luminance signal): 1 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
Video output signal RCA Connector: AUDIO, 0.5 Vrms less than 2.2 kΩ
Horizontal resolution 580 TV lines (video input)
Audio output 3 W + 3 W (Stereo)
Computer RGB input signal Video Signal:
15-pin mini D-sub connector: RGB separate type analog input: 0.7 Vp-p,
positive, 75 Ω terminated
Stereo Minijack: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo)
Horizontal sync. signal: TTL level (positive/negative) or composite sync
(Apple only)
Vertical sync. signal: Same as above
RS-232C input terminal 9-pin D-sub male connector for controlling personal computer
Mouse input terminal (for IBM/Mac) 9-pin D-sub female connector for wireless mouse
Mouse input terminal (for PC98) 9-pin mini DIN connector for wireless mouse
Speaker system 3" (8 cm) round × 2
Rated voltage AC 120 V
Rated frequency 50/60 Hz
Power consumption 355 W
Operating temperature 41°F to 104°F (5°C to 40°C)
Storage temperature -4°F to 132°F (-20°C to 60°C)
Cabinet Plastic
Laser Pointer of Remote Control Wave length : 670nm
Max. output : 1mW
Class II Laser Product
Dimensions (W × D × H) 10
25
/
64
" × 15
9
/
32
" × 4
23
/
32
" (264 × 388 × 120 mm)
Weight 16.5 lbs. (7.5 kg)
Supplied accessories Remote control unit, Four AA batteries, Extra air filter, RGB signal cable
(9.8', 3 m), Macintosh adaptor, Mouse control cable for IBM (5.9", 15cm),
Mouse control cable for Mac (5.9", 15cm), Mouse control cable (9.8', 3m), AC
cord, Lens cover (installed)
Replacement parts Lamp unit (Lamp/cage module) (BQC-XGNV1U//1), Remote control (RRMCG
1327CESA), Air filter (PFILD0051CEZZ), VGA cable (QCNW-4422CEZZ),
Macintosh adaptor (QPLGJ1510CEZZ), Mouse control cable for IBM PS/2
(QCNW-4754CEZZ), Mouse control cable for Mac (QCNW-4755CEZZ),
Mouse control cable (QCNW-4620CEZZ), AC cord (QACCU5013CEZZ)