Filter
Top Products
E-6
Operating the Wireless Mouse Remote Control
The functions of your personal computer’s mouse have been built into the remote control enabling you to operate
your projector and personal computer with only the remote control.
1. Slide the main power switch on the side of the unit on.
2. Press the POWER ON button on the front panel of the remote control to turn the projector power on.
3. When using the remote control as a wireless mouse, move the MOUSE/ADJUSTMENT sliding switch to the
MOUSE position. When using the remote control to operate the projector, move the MOUSE/ADJUSTMENT
sliding switch to the ADJ. position. To activate the remote control key back-light feature, press the LIGHT button
on the remote control. The colors of the buttons will change as shown in the table at the bottom of this page.
Wireless Mouse Remote Control
FRONT VIEW
SIDE VIEW
R
/C
O
F
F
O
N
Main power switch of
REMOTE CONTROL
Note:
When transporting
the remote control,
turn off the main
power switch to
avoid draining the
batteries.
LEFT-CLICK button
POWER ON/OFF
buttons
MUTE button
VOLUME UP-DOWN
buttons
LASER POINTER/MENU
button
E-ZOOM button
MOUSE/ADJUSTMENT
(
/ ),( / ) buttons
INPUT SELECT
buttons
MOUSE label
LIGHT button
TRANSMIT indicator
RIGHT-CLICK/ENTER
button
ON
MUTE
MN
E-ZOOM
E-Z
R-CLICK/ENTER
INPUT SELECT
VIDEO
MOUSE
LIGHT
LCD PROJECTOR
ADJ.
DATA
LASER/
MENU
VOL
OFF
ADJ. label
Remote control handling precautions
• The laser beam used in this product is harmless when
directed onto the skin, however please be careful not to
project the beam directly into the eyes. Do not stare into
the beam using any optical instrument.
• Do not expose the remote control to shocks, liquids or
high humidity.
The remote control may not operate normally if exposed to
direct sunlight or other intense light sources. Should this
happen, reposition the light source or the LCD Projector.
MOUSE/ADJUSTMENT switch
When you change the setting of the MOUSE/ADJUSTMENT switch, the
functions of certain buttons on the remote control change. You can tell which
function the button currently possesses by the color of its back-light display.
Button name
Position of MOUSE/ADJUSTMENT Switch
MOUSE ADJ.
LASER POINTER/MENU LASER POINTER (GREEN) MENU (RED)
RIGHT-CLICK/ENTER RIGHT-CLICK (GREEN) ENTER (RED)
MOUSE/ADJUSTMENT MOUSE (NOT LIT) ADJ.
/ , /
(NOT LIT)
LEFT-CLICK Yes (NOT LIT) –––
POWER ON/OFF
VOLUME UP-DOWN
MUTE Yes (RED)
E-ZOOM
VIDEO
DATA
If the main power switch on the remote contol is left on and the remote
control is not used for ten or more minutes, the energy save mode will
activate and turn off the power. When in this state, any button operation
exceding one second will reactivate the power.
Using the remote
control in a dark room
• Press the LIGHT button
to turn on the back-lights
for the operation buttons
for about 10 seconds.
The back-light colors are
explained in the table to
the right.