Filter
Top Products
E-51
Basic Operation
Displaying Dual Pictures (RGB menu only)
Projector Remote Control Picture in Picture function allows you to display two
pictures on the same screen. You can display the image
input from INPUT 4 or 5 as an inset picture overlapping
the main picture input from INPUT 1, 2 or 3.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Options (1)”.
3 Press ∂/ƒ to select “Pict in Pict”.
4 Press ß/© to select “
” to display an inset picture
(Factory preset to INPUT 4).
• The image from INPUT 1, 2 or 3 is displayed as the main
picture and the image from INPUT 4 or 5 is displayed as
the inset picture.
5 Press ß/©/∂/ƒ to move the inset picture to one
of four preset positions.
6 To exit from the GUI, press MENU.
• Inset picture can only be displayed in composite signal of
NTSC/PAL/SECAM.
• When selecting the image for the inset picture, only the
images being input will be displayed.
• The audio of the insert picture will come out of the projector’s
speakers.
• Picture in Picture does not work with UXGA signal image.
• Picture in Picture does not work when RGB signal is
interlaced.
• You can only use the following functions while in Picture in
Picture mode.
FREEZE: Works for the inset picture only.
TOOLS: Works with Picture in Picture, but the cursor is
used for TOOLS. The inset picture cannot be
moved.
1.2.3 4.5.6
1, 6
2, 3
4, 5
2
(GUI) On-screen Display
4
MOUSE
ADJ.
0
1996 1997 1998 1999
50
100 C
150 B
200 A
250
300