Filter
Top Products
E-73
Maintenance &
Troubleshooting
• This projector is equipped with one air filter to ensure the optimal operating condition of the projector.
• The air filter should be exchanged after every 2,000 hours of use.
• Have your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center exchange the filter
(PFILD0110CEZZ).
Front View
Replacing the Air Filter
46
Remove the air filter.
5
Replace the air filter.
1 3
Turn off the power.
2
Turn off the main power
and unplug the power cord.
Grasp the tab and lift open the
filter cover in the direction of the
arrow.
Remove the front filter
cover.
Reset the filter
cover.
Insert the tab on the end of the
filter cover into the filter cover
opening and press the filter
cover into position.
Press the air filter firmly into the
filter compartment.
Grasp the air filter tabs between
your fingers and pull it out of
the filter compartment.
• When resetting the filter cover, be sure the filter is securely installed. The power will not turn on unless it is correctly
installed.
Replacing the front air filter
or
Air filter