Filter
Top Products
-11
Introduction
Projector (Rear View)
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
Numbers in refer to the main pages in this operation manual where the topic is explained.
13
Remote control sensor
28
AC socket
Connect the supplied
Power cord.
11
Kensington Security
Standard connector
31
537
Rear adjustment feet
Intake vent
Exhaust vent
The speed and pitch of
the cooling fan may
change during operation
in response to internal
temperature changes.
This is normal operation
and does not indicate a
malfunction.
53
7
21
INPUT 2 terminal
Component signals.
Digital input type switch
22
INPUT 5/DIGITAL
terminal
21
22 23
23
25
26
25 26
INPUT 1 terminal
Component signals.
24
INPUT 4 terminal
Connect video
equipment.
24
INPUT 3 terminal
Connect video
equipment with an
S-video terminal.
RS-232C terminal
(Serviceman only).
Terminals Refer to “INPUT Terminals and Connectable Main Equipment” on page 19.
DT400_E_P06_15.p65 04.10.18, 1:14 PM11