Filter
Top Products
-26
Connecting to a computer with DIGITAL RGB output Terminal (DIGITAL)
• Before connecting the cable, switch the digital input type switch to “PC”.
INPUT 5 terminal
DVI output terminal
DVI cable
(sold separately: AN-C3DV)
Switch to “PC”
Computer
2
3
1
Note
•Select DIGITAL mode when connecting to digital output terminal of the computer. (See page 29.)
•Before switching “Digital input type switch” and connecting, ensure to unplug the power cord of the pro-
jector from the AC outlet and turn off the computer to be connected. After making all connections, turn on
the projector and then the computer.
“Plug and Play” function
■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC com-
patible computer will communicate their setting requirements, allowing for quick and easy setup.
■ Before using the “Plug and Play” function, ensure to turn on the projector first and the connected
computer last.
Note
•The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
Connecting to a Computer
When connecting a computer, ensure that it is the last device to be turned on after all the
connections are made.
DT400_E_P19_26.p65 04.10.18, 1:17 PM26