Filter
Top Products
19
English
Adjusting the screen display (when using an analog signal)
Automatic screen adjustment
Options in the ADJUSTMENT Menu can be adjusted
automatically (CLOCK, PHASE, H-POS V-POS).
Note:
• When setting up this monitor for the first time or after
having changed an aspect of the current system,
perform an automatic screen adjustment before use.
1. First display an image that makes the entire screen
very bright. If you are using Windows, you can use
the Adjustment Pattern on the accompanying Utility
Disk (right column).
2. Press the MENU button.
The ADJUSTMENT Menu will be displayed.
Opening the Adjustment Pattern
(for Windows)
If you are using Windows, you can use the Adjustment
Pattern (for Windows) on the accompanying Utility Disk.
This explanation is for Windows 95/98/Me/2000, and
assumes that the floppy disk drive is "A drive".
1. Place the Utility Disk (provided) into the computer’s A
drive.
2. Open [My Computer] and select [3 ½ Floppy [A:]]. If
using Windows 3.1, open [File Manager] and choose
"A drive".
3. Double click on [Adj_uty.exe] to run the Adjustment
Program. The Adjustment Pattern will appear.
3. Press the
button.
The screen will become dark and [ADJUSTING] will
be displayed. After a few seconds the ADJUSTMENT
Menu will return. (The automatic adjustment is now
complete.)
4. Press the MENU button 4 times to make the OSD
Menu disappear.
Notes:
• In most cases automatic adjustment is sufficient.
• If necessary due to any of the following, manual
adjustments (p. 20) can be performed after the
automatic adjustment.
• When further fine adjustment is needed.
• When the computer’s video input signals are
Composite Sync or Sync On Green. (Automatic
adjustments may not be possible.)
• When [OUT OF ADJUST] is displayed. (When the
screen displays an entirely dark image, the
automatic screen adjustment may be disabled.
When making an automatic adjustment, be sure
to either use the Adjustment Pattern or try
displaying an image that makes the entire screen
very bright.)
Adjustment pattern
Notes:
• After completing the adjustments, press the
computer’s [Esc] key to exit the Adjustment Program.
• If the floppy disk drive of your computer is not "A
drive", please read the below substituting the floppy
disk drive you are using in place of "A drive" or "A".
• If your computer’s display mode is set to 65K colors,
you may see the different color levels in each color
pattern or the gray scale may look colored. (This is
due to the specification of the input signal and is not
a malfunction.)