Sharp LL-T1610W Computer Monitor User Manual


 
9
English
Under certain display conditions, minute specks or
spots may be noticeable. This is common for liquid
crystal monitors and is not a malfunction.
The LCD panel has been manufactured using highly
elaborate technology. Properly working pixels
comprise 99.99% of total pixels. However, please
understand that 0.01% or less of pixels may be
missing or be brighter than usual.
Do not leave the screen displaying idly for long
periods of time, as this could cause afterimage to
remain.
If the brightness is adjusted to the minimum setting it
may be difficult to see the screen.
The quality of the computer signal may influence the
quality of the display. We recommend using a
computer able to emit high quality video signals.
Never rub or tap the monitor with hard objects.
Please understand that Sharp Corporation bears no
responsibility for errors made during use by the
customer or a third party, nor for any other
malfunctions or damage to this product arising during
use, except where indemnity liability is recognized
under law.
This monitor and its accessories may be upgraded
without advance notice.
Location
Do not use the monitor where ventilation is poor,
where there is a lot of dust, where humidity is high, or
where the monitor may come into contact with oil or
steam, as this could lead to fire.
Ensure that the monitor does not come into contact
with water or other fluids. Ensure that no objects such
as paper clips or pins enter the monitor as this could
lead to fire or electric shock.
Do not place the monitor on top of unstable objects or
in unsafe places. Do not allow the monitor to come
into contact with strong shocks or vibrations. Causing
the monitor to fall or topple over may damage it.
Do not use in places where the monitor will be
subject to direct sunlight, near heating equipment or
anywhere else where there is likelihood of high
temperature, as this may lead to generation of
excessive heat and outbreak of fire.
The Power Cord
Do not damage the power cord or place heavy
objects on it, stretch it or overly bend it. Also, do not
add extension cords. Damage to the cord may result
in fire or electric shock.
Use only the AC adapter and power cord supplied
with the monitor. Using an AC adapter other than that
supplied may lead to fire.
Insert the power plug directly into the AC outlet.
Adding an extension cord may lead to fire as a result
of overheating.
Monitor and accessory checklist
Please check that the following items are included in
the package.
LCD monitor (1)
AC adapter (1)
Power cord (1)
Utility Disk (For Windows/Macintosh) (1)
USB cable (1)
Operation manual (1)
Notes:
The digital signal cable referred to as can be
purchased separately. (model name: NL-C01E)
You are advised to retain the carton in case the
monitor needs to be transported.
Sharp Corporation holds authorship rights to the
Utility Disk program. Do not reproduce it without
permission.
Use of AC adapter
Do not use the AC adapter for other than the
specified equipment.
Unplug the AC adapter if it is not used for long time.
Do not place any objects on the AC adapter.
Do not use the AC adapter outdoors.
Do not attempt to repair the AC adapter if it is broken
or malfunctioning. Refer the servicing to the service
representative.
Do not try to open the AC adapter.
Do not use water or wet cloth for cleaning the AC
adapter.
Manual Scope
In this booklet, Microsoft Windows 2000 will be
referred to as [Windows2000], Microsoft Windows
Millenium as [WindowsMe], Microsoft Windows 98 as
[Windows98], Microsoft Windows 95 as [Windows95],
and Microsoft Windows Version 3.1 as [Windows3.1].
When there is no need to distinguish between
programs, the term [Windows] will be used.
Microsoft and Windows are registered trademarks of
Microsoft Corp. U.S. in the U.S. and the other
countries.
Macintosh is a registered trademark of Apple
Computer, INC.
Tips and safety precautions