Filter
Top Products
29
English
Power management
The monitor is based on the VESA DPMS*1 and the DVI
DMPM*2 standards.
To activate the monitor's Power Management function,
both the video card and the computer must conform to
the VESA DPMS standard and the DVI DMPM standard.
*1 DPMS: Display Power Management Signalling
*2 DMPM: Digital Monitor Power Management
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data
Channel) standard.
DDC is a signal standard for carrying out Plug & Play
functions on the monitor or PC. It transfers information
such as degree of resolution between the monitor and
PC. You can use this function if your PC is DDC compli-
ant and if it is set so that it can detect the Plug & Play
monitor.
There are many varieties of DDC due to the differences
between systems. This monitor works with DDC1 and
DDC2B.
Specifications
DPMS mode Screen Power H-sync V-sync
consumption
ON Display on 32W Yes Yes
STANDBY No Yes
SUSPEND Display off 1.5W Yes No
OFF No No
1 7
6
5432 8
9
15
14
13121110 16
17 23
22
21201918 24
(DVI-D connector with 24 pins)
No. Function No. Function
1 TMDS data 2- 13 N.C.
2 TMDS data 2+ 14 +5V
3 TMDS data 2 shield 15 GND
4 N.C. 16 Hot plug detection
5 N.C. 17 TMDS data 0-
6 DDC clock 18 TMDS data 0+
7 DDC data 19 TMDS data 0 shield
8 N.C. 20 N.C.
9 TMDS data 1- 21 N.C.
10 TMDS data 1+ 22 TMDS clock shield
11 TMDS data 1 shield 23 TMDS clock +
12 N.C. 24 TMDS clock -
The digital signal input connector pin
DPMS mode Screen Power
consumption
ON Display on 32W
OFF Display off 3W