Sharp UX-CD600 All in One Printer User Manual


 
10
INTERCOM/CONFERENCE key
Press this key to page or locate a cordless handset (page 55). During a phone
call, press the key to transfer the call to a cordless handset or begin a
conference call (page 57).
Left and right arrow keys
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers (page 91), the “REVIEW
CALLS” list (only available if you have Caller ID) (page 111), and the last
number dialed (redial; page 93).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.
FUNCTION key
Press this key followed by the arrow keys to select special functions and
settings.
REPEAT key
Press this key while listening to a message to play it again (page 66).
SKIP key
Press this key while listening to a message to skip to the next message (page
66).
DELETE key
Press this key to erase recorded messages (page 67).
Number keys
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
Machine display
18
19
20
17
16
15
TEL
Line1 Line2
This appears
when the
machine is
using line 1.
This appears
when the
machine is
using line 2.
This appears
when the
reception
mode is set
to Auto
Attendant.
This appears
when the
reception
mode is set
to TEL.
This appears
when the
reception mode
is set to TAD
(the answering
system is turned
on).
21
Note: The Line 1 or Line 2 icon
does not appear when a cordless
handset is using Line 1 or Line 2.
all.book 10 ページ 2004年6月22日 火曜日 午後12時1分