Filter
Top Products
Sending a Fax by Automatic Dialing
94
Error Correction Mode
The fax machine is set to automatically correct any distortions in a
transmission due to noise on the telephone line before printing at the
receiving end. This function is called Error Correction Mode (ECM). ECM is
effective for both transmissions and receptions, and is only effective when the
other fax machine has ECM as well.
When there is considerable noise on the line, you may find that transmission
with ECM turned on takes longer than normal. If you prefer a faster
transmission time, you can try turning ECM off.
1
Press once and once.
2
Press once and 9 times.
3
Press once.
4
Press to select YES, or to
select NO.
5
Press to return to the date and
time display.
FUNCTION
STOP
The display briefly shows
your selection, then:
♦ You can press to clear the message and stop automatic redialing.
♦ Under certain conditions (for example if a person answers the call on a
telephone), automatic redialing may stop before three redialing attempts
are made.
STOP
VOICE MAIL (L1)
Display:
OPTION SETTING
ECM MODE
ECM MODE
1=YES, 2=NO
all.book 94 ページ ２００４年６月２２日 火曜日 午後１２時１分