Silex technology SX-200 Printer User Manual


 
User’s Guide
Document #40182-420 Rev. A
38
WEP is Disabled
Link DOWN
SET NW AUTHtype
Sets WLAN Authentication type
SET NW AUTHtype [OPEN |SHARED | TTLS | LEAP | PEAP | WPA-PSK]
(default = Open System)
SH NW AUTH
Shows the wireless authentication type
sample output:
Authentication type= OPEN SYSTEM
SET NW CHannel
Sets WLAN ad-hoc channel number
SET NW CHannel n
n =
1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,12
8,132,136,140,149,153,157,161,165 (default = 11, this value is ignored in
Infrastructure mode)
SET NW ENC
Sets WLAN Encryption Mode. Supported modes are none, 64 bit WEP, 128 bit WEP, and TKIP (WPA).
SET NW ENC [DIsable | 64 | 128 | WPA | WPA2 | WPA2-WPA | Dynamic WEP ]
(default = Disable)
SH NW ENC
Shows the wireless encryption mode
sample output:
WiFi encryption is Disabled
Note:
The deprecated command SH NW WEP will also display this information
SET NW KEY#
Selects WLAN WEP key entry
SET NW KEY# n
n = 1-4 (default = 1)