Filter
Top Products
User’s Guide
Document #40182-420 Rev. A
59
Enable or disable TCP connection probes
SET IP PRObe [ENable | DIsable]
(default = disable)
SET IP RARp
Enable setting of default router and/or subnet mask based on the source of a RARP IP address set.
SET IP RARp nn
nn: 0=both 1=no subnet, 2=no router, 3=neither (default = 0)
SET IP REtry
Enable or disable LPD retry on incomplete job
SET IP REtry [ENable | DIsable]
(default = disable)
SET IP ROuter
Set the default router address
SET IP ROuter aa.bb.cc.dd
(default = 0.0.0.0)
SET IP SUbnet
Set the IP subnet mask
SET IP SUbnet aa.bb.cc.dd
(default = 0.0.0.0)
SET IP TCP
Enable or disable the raw TCP (9100) protocol
SET IP TCP [ENable | DIsable]
(default = enable)
SET IP TELnet
Enable or disable the TELNET protocol
SET IP TELnet [ENable | DIsable]
(default = enable)
SET IP TFTP