Filter
Top Products
User’s Guide
Document #40182-420 Rev. A
58
SET IP FTIme
If enabled, the IP timeout is measured in seconds. If disable, the IP timeout is in minutes.
SET IP FTIme [ENable | DIsable]
(default = disable)
SET IP FTP
Enable or disable the FTP protocol
SET IP FTP [ENable | DIsable]
(default = enable)
SET IP HTTP
Enable or disable the HTTP protocol
SET IP HTTP [ENable | DIsable]
(default = enable)
SET IP KEepalive
Set interval at which TCP keepalive packets are sent on a connection, in minutes.
SET IP KEepalive n
(default = 5 min)
SET IP LPD
Enable or disable the LPD protocol
SET IP LPD [ENable | DIsable]
(default = enable)
SET IP MEthod
Set method of getting IP address
SET IP MEthod [ AUTO | BOOTP | RARP | DHCP | STATIC ]
(default = AUTO)
SET IP PIng
Send IP ping packets to test connection to remote host.
SET IP PIng aa.bb.cc.dd
SET IP PRObe