9 | Advanced Web Configuration (Wireless Bridge mode)
Use the web management interface to define advanced system parameters,
manage and control the Wireless Ethernet Bridge and its ports, or monitor
network conditions. (Note: You MUST press [Save] and then [Reboot] for
changes to take effect.)
Browser Configuration
Confirm your browser is configured for a direct connection to the Internet using
the Ethernet cable that is installed in the computer. This is configured through
the options/preference section of your browser.
You will also need to verify that the HTTP Proxy feature of your web browser is
disabled. This is so that your web browser will be able to view the SMC2870W
configuration pages. The following steps are for Internet Explorer. Determine
which browser you use and follow the appropriate steps.
Internet Explorer in Windows
1. Open Internet Explorer. Click Tools, and then select Internet Options.
2. In the Internet Options window, click the Connections tab.
3. Click the LAN Settings button.
4. Clear all the check boxes and click OK to save these LAN settings changes.
5. Click OK again to close the Internet Options window.
Internet Explorer in Macintosh
1. Open Internet Explorer. Click Explorer/Preferences.
2. In the Internet/Explorer/Preferences window, under Network, select Proxies.
3. Uncheck all check boxes and click OK.
To access the SMC2870W’s web management interface, enter the Wireless
Ethernet Bridge IP address in your web browser as follows: http://192.168.2.25
Then enter the username and password and then click LOGIN.
Default username: admin
Default password: smcadmin