Filter
Top Products
11 | Advanced Telnet Configuration
In addition to an EZ Installation Wizard and a Web-based Management Utility,
SMC Networks also gives you the ability to manage the SMC2870W via Telnet.
All of the settings that are available via the Web-based Management are also
made available in the Telnet session. You can use the standard Telnet or
Hyperterminal programs built into Windows to manage the SMC2870W. The
setup below was done with Hyperterminal:
1) Open Hyperterminal (if you do not have this program on your PC, you can
install it using your original Windows CD)
2) Choose [Connect using:] TCP/IP (Winsock), enter your SMC2870W’s IP
address and use 23 as the Port number. Press [OK]
3) You will be asked to enter your Username and Password before you can
log in.