Filter
Top Products
If you have Wired Equivalent Privacy (WEP) security enabled on your wireless
LAN, please click the [Enable WEP] checkbox. Then enter your desired key
length and default WEP key. You can use the Passphrase function to
automatically generate a WEP key or you can enter the full 10-digit (64-bit WEP)
or 26-digit (128-bit WEP) manually in the “WEP key” field. Select your
“Authentication” method and press [Save].
Note: A passphrase can contain up to 32 alphanumeric characters.
When setting up WEP without using the Passphrase function, only Hexadecimal
characters (range: 0~9 and A~F) can be used. When encryption is set to 64-bit,
a maximum of 10 Hex characters can be entered in the Key field. When
encryption is set to 128-bit, a maximum of 26 Hex characters can be used.