SMC Networks SMC2870W Network Card User Manual


 
In the Security section, change the username and/or password used to log into
the SMC2870W. It is a good idea to write down your username and password if
you decide to change it. If you forget this information in the future, you will need
to reset the SMC2870W to defaults.
In the Commands section, you can reboot your SMC2870W or reset it to
defaults.
As we add functionality and future enhancements are made, firmware updates
will be posted to SMC’s website. After downloading the firmware, you need to
update the SMC2870W via the web interface under this Upgrade Firmware
section. Simply click the [Browse] button to locate and select the new firmware
and then press [Upload].