SMC Networks SMC2870W Network Card User Manual


 
Cet appareil numerique respecte les limites de bruits radioelectriques applicables
aux appareils numeriques de Classe B prescrites dans la norme sur le material
brouilleur: "Appareils Numeriques," NMB-003 edictee par l'Industrie.
Low Power License-Exempt Radio communication Devices (RSS-210)
1. Warning Note: operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
2. Operation in 2.4GHz band: To prevent radio interference to the licensed
service, this device is intended to be operated indoors and away from windows
to provide maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors
is subject to licensing.
Exposure of Humans to RF Fields for Mobile Radios Equipment
(RSS-102)
1. Mobile radios that are not body worn (e.g. mounted on vehicles or placed on
desks, shelves, etc.) and operated such that humans are normally separated
from their radiating element by at least 20cm are not subject to SAR tests, but
must have an RF evaluation
by the certification applicant, based on the calculated or measured field strength
value. SAR evaluation can be used if so desired in lieu of a RF evaluation of field
strength limits.
2. Exposures produced by such radios shall not exceed the exposure limits
specified in Health Canada's Safety Code 6. Health Canada’ s address is:
775 Brookfield Road, Ottawa, Ontario
Canada K1A 1C1; Tel: (613) 954 -6699 / Fax:(613) 941-1734 ;
e-mail: alice_mackinnon@hc-sc.gc.ca.
EC Conformance Declaration - Class B
SMC contact for these products in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuós Gelabert 6-8, Planta 2,
08970 - Sant Joan Despí,
Barcelona, Spain.
This RF product complies with all the requirements of the Directive 1999/5/EC of
the European parliament and the council of 9 March 1999 on radio equipment
and telecommunication terminal Equipment and the mutual recognition of their
conformity(R&TTE).