SMC Networks SMC2870W Network Card User Manual


 
Go to System | Admin Settings to change additional advanced settings. (Note: If
you are not sure how to use a particular setting or what it means, please review
the Terminology section before continuing. Any erroneous changes made here
may cause unwanted results.)
In the Device Name section, you can change the name of a particular
SMC2870W device. This is very useful if you have more than one SMC2870W on
your network.
In the IP Settings section, you can configure the unit with a static IP or set it up
to use Dynamic Host Configuration Protocol (DHCP). Note: If you want to use
DHCP, you must first make sure that you have a DHCP Server on your network
ready to distribute additional IP Addresses.