Go to Wireless | Access List to enter specific MAC Addresses that are allowed to
connect to the SMC2870W. This function gives you added security without the
overhead and increased processing that WEP or WPA may require.
Go to Wireless | Repeater to make use of the repeating functionality to extend
the wireless range of your network. (Note: You need at least two SMC2870W
units in order to successfully enable repeating on your wireless LAN)
This function makes use of Wireless Distribution System (WDS) technology. You
can specify up to six WDS links, where each link is defined by the MAC addresses
of the other repeater capable SMC2870W. (Note: The repeater function must be
enabled on both ends in order to function properly.)