Filter
Top Products
- 18 -
USING THE NETWORK SCANNER FUNCTION
2
TRANSMISSION METHODS FOR SCAN TO E-MAIL
The e-mail address for a Scan to E-mail transmission can be entered manually or selected from e-mail addresses
stored on an LDAP server.
Sending an image by entering an e-mail address manually
1
Press the [MODE SELECT] key to
select scanner mode.
The "SCAN" indicator
lights up to indicate that
scanner mode is
selected.
2
Place the original in the document
feeder tray or on the document glass.
For information on how to place the original, see
"IMAGE ORIENTATION AND STANDARD
ORIGINAL LOADING ORIENTATION" (p.20).
3
Select "INPUT ADDRESS" and press
the [ENTER] key.
If "INPUT ADDRESS"
does not appear, make
sure that "Scan to ad-hoc
E-mail" is enabled in the
Web page (p.14
).
4
Enter the destination e-mail address
and press the [ENTER] key.
To enter characters, see
"HOW TO ENTER
CHARACTERS" (p.20).
5
Press the [ ] key ( ) or [ ] key
( ) to select the original size and
then press the [ENTER] key.
The original size
changes as follows each
time the [ ] key ( )
or [ ] key ( ) is
pressed:
"8.5x11"→"8.5x5.5"
→"A4"→"B5"→"A5"
→"8.5x14"→"8.5x13".
6
Press the [START] key ( ) to begin
scanning.
SCAN USING:
INPUT ADDRESS
The original is scanned using the settings of
the scan mode that has the "Default Scan
Mode" checkbox selected.
INPUT ADDRESS
XXX@XX.XXX.com
ORIG. SIZE ENTER
8.5X11
Note