Filter
Top Products
30
Creating Files (under Superuser Privilege)
Automatically Creating Files from
Tape or Memory Label Information
MXF files can be automatically created from information
recorded in the timecode (LTC) (rec start mark, a shot
mark, a post mark) or information recorded on memory
labels (rec start mark, shot mark, cue point, IN/OUT
points).
In the case of files created from tape information, the data
between marks is treated as a real file. In the case of files
created from memory labels information, data between
marks is treated as a temporary file.
When a file is created from the information on the memory
label, data between the marks is treated as a temporary file.
Do the procedure below to enable automatic file creation.
1
Right-click in an empty area in the file list and select
Create File List from the popup menu.
The Create File List window appears.
2
Select the source (Tape or Tele-File) for which files
will be automatically created.
The information recorded on the tape or Tele-File
(memory label) is displayed.
3
Select the information for which files will be
automatically created.
When Tape is selected
The following items can be selected:
• Rec Start Mark
• Shot Mark1
• Shot Mark2
•Post Mark
When Tele-File is selected
The following items can be selected:
• Rec Start Mark
•Cue Point
• IN/OUT Mark
To prevent the misreading of timecodes at the
boundary between recorded items, the recording of
timecodes for the start and end of each file is delayed
by 2 frames.
Backing Up the Menu Settings
The Setup menu settings of the e-VTR can be saved as a
file to the computer. The saved file can be later imported to
the same e-VTR for the recovery of settings or copied to
another e-VTR.
1
Select Total in the file display mode list in the VTR
window.
The virtual file (&menu) appears in the file list.
2
Select the virtual file and right click to select Export
Menu or Import Menu from the popup menu.
When Export Menu is selected, the Input File Name
window appears.
When Import Menu is selected, the Select File Name
window appears.
3
Enter the file name or select the file to be backed up,
and then click on the OK button.
Saving the Files with a Different
Name
Copies of MXF files in the e-VTR can be saved with a
different name. This function is convenient for making
backup files and when editing the top or end position of a
file.
1
Select the file to be saved with a different name from
the file list in the VTR window, and then right click to
select “Save as ...”.
The Input File Name window appears.
2
Enter the filename and click on the OK button.
Note