Filter
Top Products
Chapter 4 Advanced Operations
Chapter 4 Advanced Operations 4-13
To change the key frame parameters
After carrying out the procedure to step 4 in the section “To recall a user
program effect” above, use the following procedure.
5 Press the UP or DOWN button in the pattern/numeric keypad, so that
the number of the key frame for which you want to change the
parameters appears in the EDIT display window.
6 Change the parameters in the menu.
7 Press the ENTER button.
This saves the changed key frame parameters.
Repeat steps 5, 6, and 7, to change the key frame parameters in all
desired key frames in turn.
8 When all the changes are made, EDIT button.
The button goes off, and the modified user program effect is resaved.